Operation; Status Lights And Buttons - Lincoln Electric FineLine 12864 Operator's Manual

BK8053-000107 Rev A.01

4.0 Operation

4.1 Status Lights and Buttons

4.1.1 Power Supply
Icon
Temperature
DC Power
ON Button
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
DC Power
Name Color
Blinking Green Performing initial power up sequence.
Steady Green
Status
Blinking Red
Off (not lit)
Steady Red
Off (not lit)
Steady Red
Off (not lit)
Pulsing White
Fast Blinking
White
Steady White
Off (not lit)
Page 49 of 118
FineLine 300HD Plasma System
Status
Temperature
Description
No errors/faults.
Error. Record error code and refer to
Section 7.0 for troubleshooting.
Off. Primary (wall) power removed.
Thermal fault. Refer to Section 7.0 for
troubleshooting.
Internal temperature is OK.
Output voltage/current currently being
supplied.
No output of voltage/current being supplied.
Not Ready. Output voltage, current, and gas
are disabled.
Changing states. Enabling the power
supply's output.
Power Supply ready. Waiting for start signal.
System output enabled.
Off. Primary (wall) power removed.
ON Button