Troubleshooting; Error Code Identification - Lincoln Electric FineLine 12864 Operator's Manual

BK8053-000107 Rev A.01

7.0 Troubleshooting

Service and Repair should only be performed by Lincoln
Electric Factory Trained Personnel. Unauthorized repairs
performed on this equipment may result in danger to the
technician and machine operator and will invalidate your
factory warranty. For your safety and to avoid Electrical
Shock, please observe all safety notes and precautions
detailed throughout this manual.

7.1 Error Code Identification

The Plasma Console App displays pop-up messages for the System errors shown in
this section. All errors and notifications are recorded in the error log (Diagnostics >
Error Log).
The Power Supply status light will display Power Supply-specific error codes only.
Error codes are displayed starting with one green blink followed by a series of red
blinks. Pauses indicate the start of another digit. Count the number of red blinks to
identify each digit in the error code and then refer to the table below to identify the
error. Errors will be displayed at least three times or until the error is cleared.
Example:
Green
(Start)
This information is subject to the controls of the Export Administration Regulations [EAR]. This information shall not be provided to
non-U.S. persons or transferred by any means to any location outside the United States contrary to the requirements of the EAR.
WARNING
8 1
Red Red
Off
(Pause) (Pause)
Page 85 of 118
FineLine 300HD Plasma System
= 815 (Coolant level is low)
5
Red
Off