Leds (Lights) - ZyXEL Communications VMG9827-B50A User Manual

1.4.3 LEDs (Lights)

The following table describes the LEDs.
None of the LEDs are on if the VMG is not receiving power.
Table 2 VMG4927-B50A LED Descriptions
LED
Power
DSL1
DSL2
Internet
LAN/WAN
Ethernet 1~4
USB
WiFi 2.4G
WiFi 5G
WPS
Chapter 1 VMG Introduction
COLOR STATUS DESCRIPTION
Green On The VMG is receiving power and ready for use.
Blinking The VMG is self-testing.
Red On The VMG detected an error while self-testing, or there is a device
malfunction.
Blinking The VMG is uploading firmware.
Off The VMG is not receiving power.
Green On The ADSL line is up.
Blinking The VMG is initializing the ADSL line.
Amber On The VDSL line is up.
Blinking The VMG is initializing the VDSL line.
Off The DSL line is down.
Green On The VMG has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the DSL
connection is up.
Blinking The VMG is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged mode.
Red On The VMG attempted to make an IP connection but failed. Possible causes
are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
Green On The VMG has a successful 10/100/1000 Mbps Ethernet connection on the
WAN.
Blinking The VMG is sending or receiving data to/from the WAN at 10/100/1000
Mbps.
Off There is no Ethernet connection on the WAN.
Green On The VMG has a successful 10/100/1000 Mbps Ethernet connection with a
device on the Local Area Network (LAN).
Blinking The VMG is sending or receiving data to/from the LAN at 10/100/1000
Mbps.
Off The VMG does not have an Ethernet connection with the LAN.
Note: The USB LED is reserved for future development.
Green On The 2.4G or 5G WiFi network is activated.
Blinking The VMG is communicating with 2.4G or 5G WiFi clients.
Amber Blinking The VMG is setting up a WPS connection with a 2.4G or 5G WiFi client.
Off The 2.4G or 5G WiFi network is not activated.
Amber On WPS is enabled.
Off WPS is disabled.
VMG4927-B50A / VMG9827-B50A / VMG3927-B50B User's Guide
25