May 2021
1
System readiness
1.1
Confirm HART
•
If using HART based control or asset management systems, confirm the
HART capability of those systems prior to transmitter installation. Not all
systems are capable of communicating with HART Revision 7 protocol.
This transmitter can be configured for either HART Revision 5 or 7.
•
For instructions on how to change the HART Revision of your transmitter,
see
Switch HART Revision
1.2
Confirm correct device driver
•
Verify the correct device driver (DD/DTM
ensure proper communications.
•
Download the correct device driver at your host vendor download site,
Emerson.com
1.2.1
Device revisions and drivers
Table 1-1
device driver and documentation for your device.
Table 1-1: Rosemount 2051 F
Files
Device
revision
(1)
2
Quick Start Guide
®
Revision capability
or
FieldComm
provides the information necessary to ensure you have the correct
Host
Device
driver
(2)
(DD)
All
DD4: DD
Rev 1
All
DD5: DD
Rev 1
Emerson AMS Device
Manager V
10.5 or
higher: DD
Rev 2
Emerson AMS Device
Manager V
8 to 10.5:
DD Rev 1
Emerson 375/475:
DD Rev 2
mode.
™
) is loaded on your systems to
Group.
Fieldbus Device Revisions and
OUNDATION
Obtain at
FieldComm
Group
FieldComm
Group
Emerson.com
Emerson.com
FieldCommun
icator.com
Quick Start Guide
Device driver
Reference
(DTM)
document
Emerson.com 00809-0200-
4101,
Rev BA or
newer
5