Product Certifications - Emerson Rosemount 2051CF Series Quick Start Manual

May 2021
9

Product certifications

9.1 European Directive Information
A copy of the EU Declaration of Conformity can be found at the end of the
Quick Start Guide. The most recent revision of the EU Declaration of
Conformity can be found at EmersonProcess.com/Rosemount.
9.2 Ordinary Location Certification
As standard, the transmitter has been examined and tested to determine
that the design meets the basic electrical, mechanical, and fire protection
requirements by a nationally recognized test laboratory (NRTL) as accredited
by the Federal Occupational Safety and Health Administration (OSHA).
9.3 Hazardous Locations Certifications
Note
Device ambient temperature ratings and electrical parameters may be
limited to the levels dictated by the hazardous location certificate
parameters.
9.4 North America
E5 USA Explosionproof (XP) and Dust-Ignitionproof (DIP)
Certificate: FM16US0232
Standards: FM Class 3600 - 2011, FM Class 3615 - 2006, FM Class 3616 -
Markings:
I5 USA Intrinsic Safety (IS) and Nonincendive (NI)
Certificate: FM16US0231X (HART
Standards: FM Class 3600 - 2011, FM Class 3610 - 2010, FM Class 3611 -
Markings:
Quick Start Guide
2011, FM Class 3810 - 2005, ANSI/NEMA 250 - 2008. ANSI/IEC
60529 2004
XP CL I, DIV 1, GP B, C, D; DIP CL II, DIV 1, GP E, F, G; CL III;
T5(-50 °C ≤ T ≤ +85 °C); Factory Sealed; Type 4X
a
2004, FM Class 3810 - 2005, ANSI/NEMA 250 - 2008
IS CL I, DIV 1, GP A, B, C, D; CL II, DIV 1, GP E, F, G; Class III; DIV
1 when connected per Rosemount drawing 02051-1009;
Class I, Zone 0; AEx ia IIC T4; NI CL 1, DIV 2, GP A, B, C, D;
T4(-50 °C ≤ T ≤ +70 °C); Type 4x
a
®
)
Quick Start Guide
27