Housing Rotation - Emerson Rosemount 2051CF Series Quick Start Manual

Quick Start Guide
3

Housing rotation

To improve field access to wiring or to better view the optional LCD display
follow the procedure steps.
Figure 3-1: Housing Rotation
A. Housing rotation set screw (5/64-in.)
Procedure
1. Loosen the housing rotation set screw using a 5/64 -in. hex wrench.
2. Rotate the housing clockwise to the desired location.
3. If the desired location cannot be achieved due to thread limit, rotate
the housing counterclockwise to the desired location (up to 360°
from thread limit).
4. Retighten the housing rotation set screw to no more than 7 in-lbs
when desired location is reached.
14
A
May 2021
Emerson.com/Rosemount