Omron NA5-15W101S-V1 User Manual page 98

4 System Program
When Connected to an NX-series Communication Control Unit
System configuration element
Communication Control Unit
NX Units
*1. Events are not displayed for some NX Units.
*2. Errors that occur on a specific NX Unit cannot be cleared separately.
*3. It might be necessary to reset errors in Safety Control Units with a safety program. Refer to the NX-series Safe-
ty Control Unit/Communication Control Unit User's Manual (Cat. No. Z395) for details on resetting errors in
Safety Control Units.
*4. Event logs for individual units cannot be cleared.
4 - 16
Troubleshooter functions
Displaying Clearing
errors errors
Partially appli-
Applicable
*1
cable
NA-series Programmable Terminal Hardware(-V1) User's Manual (V125)
Displaying Clearing error
error logs
Applicable
*2*3
Applicable
Applicable
logs
*4