Omron NA5-15W101S-V1 User Manual page 119

System configuration
All NA5 Series Programmable Terminals support the Safety Monitor. To use the Safety Monitor, an SD
memory card needs to be inserted into the NA unit.
The equipment that can be monitored is as follows.
 CPU Unit
• NJ-series CPU Unit
• NX-series CPU Unit
 Communication Control Unit
• NX-CSG320
 Safety Controller Unit
• NX-SL5
• NX-SL3
 Safety I/O Unit
• NX-SIH400
• NX-SID800
• NX-SOH200
• NX-SOD400
 Connection path
NJ-series CPU Unit
NX-series CPU Unit
NX-CSG320
*1. Only NX102- supports it.
NA-series Programmable Terminal Hardware(-V1) User's Manual (V125)
Directly connected to the CPU unit
Not supported
*1
Supported
Supported
4 System Program
Via an EtherCAT coupler unit
Supported
Supported
Not supported
4
4 - 37