3. On the right side of the Startup Task Panel, select TU Adapter - Wireless and then click the
Figure 15. Wireless Network Utilities
4. Select the network you wantTracerTU to join. Click the Join button.
5. If aTracer SC is present on the network, a log-in prompt appears. Enter yourTracer SC user-ID
BAS-SVX40B-EN
Appendix: Using the Tracer™ TU Service Tool with Wireless Networks
Connect button.The Wireless Network Utilities screen appears
and subnetwork numbers (which correspond to WCI address settings; see
p.
11), and signal strength for all existing wireless networks within radio range ofTracerTU. A
closed padlock icon indicates that aTracer SC login is required. An open padlock icon indicates
that noTracer SC login is required.
Note: TracerTU can join only one network at a time.
and password. After log-in, the Wireless Network Utilities screen appears as shown in
Figure
16.
Note: If noTracer SC is present on the network, the screen shown in
the need to log in.
In the Security column, the lock icon is replaced by a key icon to identify the network thatTracer
TU has joined, and two additional tabs appear on the screen.
(Figure
15) showing the group
"WCI Addressing, "
Figure 16
appears without
29