Disassembling The Veriton 7600Gtr/Gr/V; Opening The Housing; Removing The Housing; Removing The Front Panel - Acer Veriton 7600GTR Service Manual

Disassembling the Veriton 7600GTR/GT/V

Opening the Housing

This section tells you how to open the housing cover when you need to install additional components inside
the system unit.
CAUTION: Before you proceed, make sure that you have turned off the system and all peripherals connected
to it.

Removing the Housing

1. Turn off the system power and unplug all cables.
2. Remove the two screws holding the upper cover
3. Slide the left cover out and then gently pull it outward to detach it from the housing.
.

Removing the Front Panel

1. Remove the front panel as the picture shows carefully.
.
Removing the ODD/FDD/HDD
1. Disconnect the ODD power cable and ODD cable from the ODD.
.
2. Disconnect the FDD cable and FDD power cable from the FDD.
Chapter 3 69