Operation; Pull Chain Operating Instructions - HAMPTON BAY HAWKINS YG204-BN Use And Care Manual

Assembly — Installing the Light Kit (continued)
Installing the fan without the
11
light kit (Optional)
□
Disassemble the switch housing cover (TT) from the
light kit (F). You can keep the light kit (F) for future use.
□
Attach the plastic plug (KK) to the switch housing cover
(TT).
□
Install the switch housing cover (TT) to the switch
housing with light kit mounting screws (FF) provided.

Operation

PULL CHAIN OPERATING INSTRUCTIONS

PULL CHAIN OPERATING INSTRUCTIONS
Install two pull chains and fobs (JJ) onto the pull chains located in the
switch housing and light kit (F). Turn on the power and check the
operation of the fan.
The pull chain controls the fan speed as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low and 4 pulls - Off.
Speed settings for warm or cool weather depend on factors such as the
room size, ceiling height, number of fans, and so on.
To turn the light On or Off, pull the chain that is attached to the light
kit (F).
TT
JJ
14
FF
KK