HAMPTON BAY HAWKINS YG204-BN Use And Care Manual page 13

Assembly — Installing the Light Kit (continued)
10
Installing the glass shade
CAUTION:
Before starting the installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
□
While holding the glass shade (G), slip the pull chain
(RR) from the switch housing into the outside hole in
the glass shade (G).
□
Feed the pull chain (SS) from the light kit stem
through the eyelet in the glass shade (G).
□
Place the glass shade (G) over the light kit stem.
Secure the glass shade (G) with the metal nut (GG)
(rubber side on the top).
□
Fit the glass cap (HH) onto the light kit stem and then
slip the pull chain (RR) through the hole on the side of
the glass cap (HH).
□
Feed the pull chain (RR) from the light kit stem
through the glass cap (HH) and the decorative nut (II),
and then thread the decorative nut (II) on securely. Do
not overtighten.
RR
13
Please contact 1-855-HD-HAMPTON for further assistance.
F
SS
G
GG
HH
II
HAMPTONBAY.COM