Manitenance; Warm Restart; Factory Default; Software Upload - EverFocus ES1645-51 User Manual

ES1645-51
Chapter 6

6. Manitenance

6.1 Warm Restart

Press Yes button to restart the switch, the reset will be complete when the power lights stop
blinking.

6.2 Factory Default

Forces the switch to restore the original factory settings. To reset the switch, select "Reset to
Factory Defaults" from the drop-down list and click Apply. The LAN IP Address, Subnet Mask and
Gateway IP Address will be reset to their factory

6.3 Software upload

Select "Upgrade Firmware" from the Tools drop-down list then click on the "Browse" button to
select the firmware file. Click the APPLY button to upgrade the selected switch firmware file. User
can download firmware files for user's switch from the Support section of your local supplier.
31