Igmp Status - EverFocus ES1645-51 User Manual

RSTP Port Status
 Port/Group: The number of a port or the ID of a static trunk.
 Path Cost: The cost for a packet to travel from this port to the root in the current Spanning Tree
configuration. The slower the media, the higher the cost.
 Edge Port: Shows if this port is functioning as an edge port, either through
 manual selection (see the RSTP Port Configuration table) or auto-detection. Note that if the
switch detects another bridge connected to this port, the manual setting for Edge Port will be
overridden, and the port will instead function as a point-to-point connection.
 P2P Port: Shows if this port is functioning as a Point-to-Point connection to
exactly one other bridge. The switch can automatically determine if the interface is attached to
a point-to-point link or to shared media. If shared media is detected, the switch will assume
that it is connected to two or more bridges.
 Protocol: Shows the spanning tree protocol functioning on this port, either RSTP or STP (that is,
STP-compatible mode).

5.5 IGMP Status

IGMP Status
IGMP Status shows the IGMP Snooping statistics for the whole switch.
 VLAN ID: VLAN ID number.
 Querier: Show whether Querying is enabled.
 Queries transmitted: Show the number of transmitted Query packets.
 Queries received: Show the number of received Query packets.
 v1 Reports: Show the number of received v1 Report packets.
 v2 Reports: Show the number of received v2 Report packets.
 v3 Reports: Show the number of received v2 Report packets.
 v3 Leave: Show the number of v3 leave packets received.
28
ES1645-51