Qos - EverFocus ES1645-51 User Manual

4.7.1 QoS

In QoS Mode, select QoS Disabled, 802.1p, or DSCP to configure the related parameters.
QoS Configuration
 Strict: Services the egress queues in sequential order, transmitting all traffic in the higher
priority queues before servicing lower priority queues.
 WRR: Weighted Round-Robin shares bandwidth at the egress ports by using scheduling weights
with default values of 1, 2, 4, 8 for queues 0 through 7, respectively. (This is the default
selection.)
※Note: WRR can only be selected if Jumbo Frame mode is disabled on the Port Configuration
page
18
ES1645-51