Advertisement
Settings
The compressor short cycle
Compressor
delay setting will not allow the
Short Cycle
compressor to be turned on for 5
minutes after it was last turned off
Delay
in order to protect the compressor.
The cooling differential is factory
preset at 0.5°. This means that
whenever the room temperature
Cooling
heats by 0.5° from the temperature
setting, the cooling system will
Differential
turn on. If the cooling system
turns on too often, increase the
temperature differential.
The heating differential is factory
preset at 0.4°. This means that
whenever the room temperature
Heating
cools by 0.4° from the temperature
Differential
setting, the heating system will turn
on. If the heating system turns on
too often, increase the temperature
differential.
INSTALLER SETUP MENU
Display
Adjustment Options Default
Next step
The compressor short cycle
delay setting can be removed by
selecting OFF.
Prev step
Next step
The cooling differential setting is
adjustable from 0.2°F to 2°F.
Prev step
Next step
The heating differential setting is
adjustable from 0.2°F to 2°F.
Prev step
ON
0.5
0.4
13
Advertisement
