Advertisement
Thank you for purchasing a Robertshaw
install and test the Robertshaw RS9210 thermostat.
Thermostat System Types
Gas, Oil, or Electric Heat with Air Conditioning
Heat Pumps (with or without auxiliary or emergency heat)
Multi-Stage Systems
Heat-Only, including for Floor and Wall-Furnace
Cool-Only
750 Millivolt Heating Systems
Power Options
Battery Power
Hardwire (Common Wire)
Table of Contents
INSTALLATION MANUAL
thermostat. This manual will describe how to
®
IMPORTANT SAFETY INFORMATION
WARNING:
• Always turn off power at the main power
source by unscrewing fuse or switching
circuit breaker to the off position
before installing, removing, cleaning, or
servicing thermostat.
• Read all of the information in this manual
before installing or programming this
thermostat.
• This is a 24V AC low voltage thermostat.
Page
Do not install on voltages higher than
30V AC.
2
• All wiring must conform to local and
3
national building and electrical codes
4
and ordinances.
5-12
• Do not short (jumper) across terminals
13-17
on the gas valve or at the system control
18
to test installation. This will damage the
19-22
thermostat and void the warranty.
23
1
- Quick Links:
- Installer Setup Menu
Hide quick links:
Advertisement
