7. Remove two (2) screws (D) on LCD hinges. (Figure 3-39)
D
D
Figure 3-39. Removing Screws on LCD Hinges
8. Remove upper cover from LCD module.
LCD Module Installation
0
NOTE:
NOTE:
Cover LCD panel with a cloth or sheet to protect LCD panel from being damaged.
1. Install and align upper cover (F) with LCD module (G) as shown in
Figure
3-38.
2. Install and secure two (2) screws (D) on LCD hinges.
(Figure
3-39)
3. Install LVDS cable (C) to mainboard connector.
(Figure
3-36)
4. Install WLAN cable (A) to guides (B) on fan module.
5. Install WLAN main (A) and auxiliary (B) antenna cables to WLAN module connectors.
(Figure
3-35)
6. Install lower cover.
ID
Size
Quantity
Screw Type
D
M2.5x5.0
2
3-38
Machine Maintenance Procedures