Acer TravelMate 5760 Service Manual page 166

3. Navigate to Start
with Removable Storage panel.
4. Navigate to Start
Manager.
5. Double click lDE ATA/ATAPI controllers. If a device shows a down arrow, right click on
the device and click Enable.
6. Double-click DVD/CD-ROM drives. If the device shows a down arrow, right click on the
device and click Enable.
7. Make sure that there are no yellow exclamation marks against the items in lDE
ATA/ATAPI controllers. If a device has an exclamation mark, uninstall and reinstall
the driver.
8. Check that there are no yellow exclamation marks against the items in DVD/CD-ROM
drives. If a device has an exclamation mark, uninstall and reinstall the driver.
9. If the exclamation marker is not removed from the item in the lists, remove any recently
installed software and retrying the operation.
Discs Do Not Play
If discs do not play when inserted into the drive, perform the following:
1. Check that the disc is correctly seated in the drive tray and that the label on the disc is
visible.
2. Check that the media is clean and scratch free.
3. Try an alternate disc in the drive.
4. Confirm that AutoPlay is enabled:
 Navigate to Start
 Select Use AutoPlay for all media and devices.
 In the Audio CD and DVD Movie fields, select the desired player from the drop down
menu.
5. Check that the Regional Code is correct for the selected media:
+
IMPORTANT:
 Navigate to Start
Manager.
 Double click DVD/CD-ROM drives.
 Right click DVD drive and click Properties, then click the DVD Region tab.
 Select the region suitable for the media inserted in the drive.
Discs Do Not Burn Properly
If discs can not be burned, perform the following:
6. Confirm that the default drive is record enabled:
 Navigate to Start
 Select the Recording tab. In the Desktop disc recording panel, select the
writable ODD from the drop down list.
 Click OK.
7. Confirm that the software used for burning discs is the factory default. If using different
software, refer to the software's user manual.
4-16

Computer. Check that the ODD device is shown in the Devices

Control Panel

Control Panel
Region can only be changed a limited number of times. After Changes
remaining reaches zero, the region cannot be changed even when Windows
is reinstalled or the drive is moved to another computer.

Control Panel

Computer and right-click the writable ODD icon. Click Properties.

System and Maintenance

Hardware and Sound

System and Maintenance
 
System Device

AutoPlay.
 
System Device
Troubleshooting
0
0