USB Module Removal
Prerequisite:
1. Locate USB module (G) on upper cover. Refer to
2. Unlock and disconnect USB FFC (A) from USB board connector (B). (Figure 3-27)
D
Figure 3-27. USB Module
3. Remove screw (C) from upper cover.
4. Remove USB module (D) from upper cover.
USB Module Installation
1. Install USB module (D) on upper cover. (Figure 3-27)
2. Install and secure screw (C) to upper cover.
3. Install USB FFC (A) to USB board connector (B).
4. Install lower cover.
ID
Machine Maintenance Procedures
Lower Cover Removal
C
Size
C
M2.0x3.0Ni
Figure
3-20.
A
B
Quantity
1
Screw Type
3-29
0
0