CAUTION:
!
Make sure all cables are moved away from the device to avoid damage
during removal.
LCD Module Installation
1. Place the LCD Module on the base assembly. Refer to
2. Align LCD hinges with the hinge guides on the Base Assembly. Refer to
3. Install and secure three (3) screws (A) to LCD hinges. Refer to
4. Place the cables (B) to the cable guides and secure it with the tape (C). Refer to
Figure
3-33.
5. Install Mainboard.
ID
Size
A
M2.5*6
3-36
Figure
Quantity
3
Machine Maintenance Procedures
3-34.
Figure
3-34.
Figure
3-33.
Screw Type
0