Removing The Heatsink; Removing The Daughter And I/O Board - Acer TravelMate 360 Service Manual

Removing the Heatsink

1. See " Removing the Battery Pack" on page 53
2. See " Removing the Hinge Caps" on page 58
3.
See " Removing the Middle Cover" on page 58
4. See " Removing the Keyboard" on page 59
5. See " Removing the EMI Plate" on page 63
6. See " Removing the Upper Case" on page 67
7. See " Removing the Main board" on page 70
8. See " Removing the CPU EMI Plate" on page 70
9. Detach the ESD tape from the main board.
10. Lift up the heatsink and disconnect the fan cable from the main board at CN27.
11. Then remove the heatsink.

Removing the Daughter and I/O board

1. See " Removing the Battery Pack" on page 53
2. See " Removing the Hinge Caps" on page 58
3. See " Removing the Middle Cover" on page 58
4. See " Removing the Keyboard" on page 59
5. See " Removing the EMI Plate" on page 63
6. See " Removing the Upper Case" on page 67
7. See " Removing the Main board" on page 70
8. Remove the two screws from the USB daughter board.
72 Chapter 3