Acer TravelMate 360 Service Manual page 45

The following table describes the parameters in this screen. Settings in boldface are the default and
suggested parameter settings
.
Parameter
Boot Display
Screen Expansion
Resume on LAN Access
Hotkey Beep
CPU Power Management Mode
Technology Select CPU power policy.
R TM
Intel SpeedStep
Chapter 2
Description
Sets the display device on boot-up.
When set to Auto, the computer automatically
determines the display device. If an external device
(e.g., monitor) is connected, it becomes the boot
display. When set to Both, the computer outputs to
both the LCD and the external display if one is
connected.
Expand the screen on the graphic/text mode.
When it is disabled, the graphic/text mode expansion
function is disabled and the graphic/text image will be
centralized on the LCD. If it is enabled. The graphic/
text image will be expanded to the full LCD screen.
When enabled, the computer will wake up from Sleep
state if any LAN access to it occurs.
When enabled, the computer makes a beep when a
hot key (Fn+F4) is pressed.
When auto, the computer can support stop clock
function. When disable, the computer will disable stop
clock function.
Options
Both or Auto Both
Both Both
Enabled or Disabled Enabled
Enabled Enabled
Enabled Enabled or Disabled Enabled Enabled
Enabled or Disabled Enabled
Enabled Enabled
Disabled or Auto
Automatic Automatic
Automatic Automatic
Maximum Performance
Battery Optimized
Reversed
37