Disassembling the LCD
Removing the Hinge Caps
1.
See " Removing the Battery Pack" on page 53
2.
To avoid risk on LCD damage, place a protective mylar film on the LCD surface before disassembly.
3.
Push the right and left hinge caps outward, then slide the caps out from the main unit.
Removing the Middle Cover
1.
See " Removing the Battery Pack" on page 53
2.
See " Removing the Hinge Caps" on page 58
3.
Push the middle cover backward and lift the middle cover away from the system.
4.
Disconnect the LED FPC from the main board at CN9 and remove the middle cover from the main unit.
58
Chapter 3