3.
When the Hard Disk Password is set, the following prompt appears at boot-up.
Type the Hard Disk Password (a dot appears for each character you type) and press
computer. If you enter the password incorrectly, an x symbol appears. Try again and press
You have three chances to enter a password. If you successfully entered the password, the following symbol
appears..
If you fail to enter the password correctly after three tries, the system hangs and displays the symbol as
following. l
To change a password, follow the same steps used to set a password.
To remove a password, follow the same steps used to set a password, except type nothing in the password
boxes.
Load Default Settings
If you want to restore all parameter settings to their default values, select this menu item and press
following dialog box displays.
If you would like to load default settings for all parameters, use the cursor
e
e
e
e
press
. Choose No if otherwise.
44
e
e
e
e
to use the
e
e
e
e
z z
z
z
x x
x
x
/
keys to select Yes; then
.
e
e
e
e
. The
Chapter 2