Storing Fans - Siemens SINAMICS SH150 Operating Instructions & Installation Instructions

● In order to ensure protection against ground moisture and water, place the equipment and
● Ensure that the air circulation under the equipment is not impeded.
NOTICE
Damage to the device as a result of incorrect storage
Incorrect or excessively long storage can damage the equipment.
● Do not store the device outdoors.
● Observe the specified conditions for storing the device.
● Ensure that it is not stored for longer than the permissible maximum of two years.
Protection against humidity
● If a dry storage area is not available, then take the following precautions:
4.5.3

Storing fans

NOTICE
Diminished fan function if the fan is incorrectly stored
Even if the fan is not used, the bearing grease ages. The utility of the fan can be impaired.
● Rotate the fan at least once a year.
● Do not store the fan for longer than two years before commissioning.
SINAMICS SH150 6SL3805
Operating Instructions 05/2020
crates on pallets, wooden beams or foundations.
– Place wooden spacer blocks between the covers and the device.
– Do not place covers or tarpaulins completely around the equipment on the floor.
– Wrap the device in humidity-absorbent material. Then wrap the device in film so that it is
airtight.
– Place a humidity meter that can be read from outside inside the film wrapping. Observe
the values provided in the technical specifications on relative humidity. Check the values
regularly using the humidity meter.
– Inspect the device regularly.
Preparations for use
4.5 Storage
55