Transport With A Crane; Using Lifting Rods - Siemens SINAMICS SH150 Operating Instructions & Installation Instructions

4.3.5

Transport with a crane

Danger due to incorrect transport
If the transport unit is not properly transported with a crane, the transport unit/cabinet could fall
or tip over This can result in death, serious injury or material damage.
● Carefully comply with the safety instructions relevant for transport.
● Carefully observe the information regarding the center of gravity on the transport unit.
Danger due to unsuitable cross-arms
If inappropriate cross-arms are used, the transport unit or cabinet can tip over. This can result
in death, serious injury or material damage.
● Observe the specifications provided in DIN EN 13155 on cross-arms.
Observe the following points for safe transport:
● When using a crane to transport the equipment, keep to the permissible lifting capacity. Pay
● If the cabinet center of gravity is off-center, use suitable lifting equipment, e.g. a lifting beam.
● If the cabinet has eye hooks, use them. In such cases, do not use any lifting rods.
4.3.6

Using lifting rods

When transporting by crane, note that the force is applied via the transport rails attached to the
bottom of the cabinet.
Note
Lifting bars
The lifting bars are not included in the scope of delivery.
Danger if the device falls
Inadequately dimensioned lifting rods are liable to bend or break. As a consequence, the
device can fall from the crane. This can result in death, serious injury or material damage.
● Use suitable lifting rods for transporting. The weight of the cabinet is indicated on the rating
SINAMICS SH150 6SL3805
Operating Instructions 05/2020
WARNING
WARNING
attention to the center of gravity position.
WARNING
plate.
Preparations for use
4.3 Transport
47