Advertisement
PREVENTION
Switch off the vacuum cleaner immedi-
ately if the air intakes, the floor brushes
or the telescopes tube becomes blocked.
Before starting the vacuum cleaner up
again remove the substance causing the
blockage:
1. Never use the vacuum cleaner in the
immediate vicinity of hot bodies and do
not suck up hot objects such as ciga-
rette ends or ashes.
2. Only place the plug in the socket
when your hands are dry.
3. Please remove large of sharp objects
from the floor before using the vacuum
cleaner to avoid any possible damage to
it.
4. Do not pull by the mains cable when
pulling out the plug.
ASSEMBLING THE VACUUM CLEAN-
ER
1. Assembly and disassembly of the
tube
Montage:
Insert the tube in the air intake open-
ing.
Push the tube in until it locks in place
Disassembly:
Take the tube from the air intake after
disconnecting from the mains socket.
2. Assembling the telescope tube and
accessories
2.1: Remove the telescope tube from
the hand grip.
2.2: Set the telescope tube to the cor-
rect length.
Push the telescope tube slide forwards
and pull out the lower part of the tube
to the extension length required. Then
simply let go of the slide and let it snap
into place
2.3: Fix the floor brush to the telescope
tube.
4
Advertisement
