Table of Contents
Advertisement
Setup
Setup
Propane Tank
Propane (LP gas) supply tank not provided by Graco.
Supply tank must be vertically mounted and vapor
withdrawal type. Supply tank must be designed,
fabricated, and marked in accordance with specifications
and regulations for LP-Gas cylinders at: The U.S.
Department of Transportation (DOT); the National
Standard of Canada, CAN/CSA-B339, Cylinders,
Spheres, and Tubes for Transportation of Dangerous
Goods; the Transportable Pressure Vessels Regulations
2001 (S1 2001/1426); or the Gas Cylinders (Pattern
Approval) Regulations 1987 (SI 1987/116)(Pattern
Approval Regulations) for EEC-type cylinders under
European Directive 84/525/EEC, 84/526/EEC, and
84/527/EEC.
Check gas supply hose connection to propane cylinder.
Make sure fitting is free of debris before connecting to
tank. Make sure gas connection is screwed completely
on and is free of leaks.
NOTE: The propane tank connection hose is equipped
with a POL gas fitting. If a different sized fitting is
needed, see your local LP gas equipment supplier.
10
Lifting Instructions
•
Only lift the equipment using all available lift points.
The lift chains must be angled at least 45° from the
horizontal.
•
Lift the system with a lift apparatus rated
appropriately for the weight of the system. See
Technical Data, page 72.
•
Lift the system using the lift eyes shown on the
appropriate illustration.
3A7600C
Advertisement
Table of Contents
