Jensen JDC218BT Installation & Owner's Manual page 9

JDC218BT OPERATION
AM/FM Tuner Operation
nn ll
Seek Tuning
Press TUNE or TUNE momentarily to seek to the
next strong station.
nn ll
Manual Tuning Press and hold TUNE or TUNE until "MANUAL"
nn ll
appears, then press TUNE or TUNE momentarily
to change radio frequency up or down one step at a time.
Press and hold to advance quickly.
Note: Seek and manual tuning functions are reversed if
Seek Priority is set to SEEK 2 in the setup menu (refer to
page 7 for details on setting Seek Priority).
Band
Press BAND to select between FM1, FM2, FM3, AM1 and
AM2 bands.
Storing and Recalling
Up to 18 FM stations and 12 AM stations can be stored. To
Station Presets
store a station, select the desired band and station. Press
and hold the desired preset button (1-6) for more than
2 seconds. When stored, the preset number will appear in
the display. The station can be recalled anytime by pressing
the corresponding preset button.
Automatically Store
Press and hold AUDIO/MENU for more than 3 seconds to
Stations
find auto store in the display. Then press volume knob to
automatically store strong 6 stations in the current band.
9