JCV2015BT CONTENTS Introduction ..........................1 Copyrights and Trademarks Safety Information ........................2 Sirius, XM and all related marks and logos are trademarks of Sirius XM Radio Inc. and its Installation ..........................3 subsidiaries. Visit www.siriusxm.com/xmlineup for updates. All programming/channel lineup/ XM Wiring ............................
Content List System Features Jensen Heavy Duty Radio Hardware Kit Features of Jensen JCV2015BT mobile audio system include: Quick Reference Guide Full Dot Matrix LCD AM/FM US/EURO Tuner with 30 Presets (12AM, 18FM) HARDWARE KIT CONTENTS ...
JCV2015BT SAFETY INFORMATION Compatible Disc Types When Driving Table 1: General Disc Information Keep the volume level low enough to be aware of the road and traffic conditions. Diameter/ Disc Type Logo Playback Time When Washing Your Vehicle Playable Sides Do not expose the product to water or excessive moisture.
JCV2015BT INSTALLATION DIN Front Mount Slide the mounting sleeve off of the This unit is designed for installation in vehicle cabs with an existing 1-DIN radio opening. In chassis if it has not already been many cases, a special installation kit will be required to mount the radio to the dashboard. See removed.
Page 6
JCV2015BT provide cavity for rear support. In these applications, place the rubber bushing over the screw stud and insert. CAUTION: The perforated rear support strap or rear rubber mounting bushing must be used in the installation of the radio. Installation without either may result in damage to the radio or the mounting surface and void the manufacturer’s warranty.
JCV2015BT WIRING DETAIL A SHOWN FROM PIN VIEW DESCRIPTION DESCRIPTION DESCRIPTION CAN-HI FRONT LEFT + SPEAKER AUX 1 COMM CAN-LO FRONT LEFT - SPEAKER RIGHT AUX INPUT1 PARK LIGHTS REAR LEFT + SPEAKER AUX 1 ON/OFF +12V IGNITION REAR LEFT - SPEAKER...
JCV2015BT BASIC OPERATION Mute Press the MUTE button (24) to mute the audio output. Press MUTE again to restore the audio output to the previous level. Mode Press the MODE button (4) to select a different mode of operation, as indicated on the display panel.
Page 9
JCV2015BT Use the rotary encoder (1) to adjust the Balance between the left and right speakers from “Left SXi Firmware Version 12” to “Right 12”. Weather Alert Configuration Min Alert Level (All / None / Warnings / Watches) Fader ...
Page 10
JCV2015BT Auxiliary Input To access an auxiliary device: Connect the audio player to either the AUX IN on the front panel (13) or at the rear of the unit with the Low Level Aux leads. Connecting to the front panel (13) will automatically trigger and switch to Front...
JCV2015BT TUNER OPERATION Automatically Store / Preset Scan (AS/PS) Automatically Store Select an AM or FM band. Press and hold the AS/PS button (14) for more than 2 seconds to automatically select 18 strong stations (12 for AM). “Storing Presets” appears on the screen and the new stations replace any stations already stored.
Page 12
JCV2015BT Weather Band Operation surrounding conditions, weather, obstructions of the signal by hills or mountains, etc. NOAA Weather Alert What is the NOAA Weather Radio/Weatheradio Canada? The Weather Alert function adds an additional level of user safety by automatically switching...
JCV2015BT CD/MP3/USB PLAYBACK Press the MUTE/>|| button again to resume play. Previewing Tracks Press the 2/INT button (6) to play the first 10 seconds of each track in the current folder sequentially. Press 2/INT again to stop Intro Scan and resume normal play at the current track.
JCV2015BT SATELLITE RADIO OPERATION Channel Up/Down Tuning Press the TUNE/SEEK |<< / >>| buttons (18, 19) to search for a channel. Press and hold the TUNE/SEEK buttons to fast search. Direct Tuning Mode Press and hold the INFO/ENTER button (16) to enter direct tuning mode.
Page 15
JCV2015BT Satellite Signal Strength Reset SiriusXM Channel Lock Code The display will indicate satellite reception strength as shown below. If you forget your Parental Control lock code, use the following directions to reset the code to the default “0000”. Resetting the lock code will not affect the locked channels list.
Page 16
JCV2015BT Advisory Messages Reported by the SiriusXM Vehicle Tuner Table 3: SiriusXM Advisory Messages On-Screen Display Advisory Message Cause Explanation/Solution Check Antenna Check Antenna The radio has detected a fault with the SiriusXM antenna. The Verify that the antenna cable is connected to the SiriusXM antenna cable is either disconnected or damaged.
JCV2015BT iPod OPERATION ® long as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it or by turning the ignition off. When the ignition is turned off, the iPod will pause and then enter sleep This unit is equipped with an iPod®...
JCV2015BT. device. Press the SEEK+ or SEEK- button to choose Lock/Unlock, Disconnect or Delete Make sure the device is on and ready to receive a signal from the JCV2015BT. With the for this device. JCV2015BT in Bluetooth Audio mode, choose “BT Pair” from the JCV2015BT menu and ...
Selecting Tracks During playback, press the SEEK/TUNE button (18, 19) to play the previous or next track. The JCV2015BT is able to communicate with this system to allow you to use other electronic Pausing Playback devices in conjunction with your radio. This includes devices such as OEM Steering Wheel During playback, press the MUTE/>|| button (24) to pause the Bluetooth audio playback.
JCV2015BT CARE AND MAINTENANCE TROUBLESHOOTING Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Symptom Cause Solution Keep the product away from dust and dirt, which can cause premature wear of parts.
JCV2015BT SPECIFICATIONS FCC Notes Signal to Noise Ratio ............≥ 65 dB WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.