Panasonic CS-25XKE Service Manual page 134

Setting connection network
Check that the Wireless LAN LED is ON. Point the remote control to the air conditioner
1
and press the Wireless LAN
Connection Guide
Step 1 Step 1 Step 2 Step 2
SET
CANCEL
Next
Cancel
Select the status of the Wireless LAN
2
LED.
Connection Guide
Step 1
Step 2
Wireless LAN LED.
LED is OFF
LED is ON
LED is Blinking
Cancel
button until the Wireless LAN LED starts blinking.
Fast blink
Step 3 Step 3
Slow blink The unit is not securing the connection.
No blink
(stays on)
• It can establish the connection to the unit even if the
unit is turned OFF.
Note
• If the Wireless LAN LED blinks continuously and
you do not want to use the app, press the Wireless
LAN button to turn it off.
Select the preferred connection setup
3
mode.
Step 3
The unit is establishing the connection.
The unit has established the connection.
Connection Guide
Step 1 Step 2
The router supports WPS.
Connect with WPS mode
The router does not supports WPS.
Connect with AP mode
Cancel
134
Step 3