Panasonic DMR-UBC90 Operating Instructions Manual page 98

Hide thumbs Also See for DMR-UBC90:
Table of Contents

Advertisement

7.1ch Audio Reformatting
[BD-V]
Surround sound with 6.1 ch or less is
automatically expanded and played back
at 7.1 ch.
• If "Off" is selected, sound is played over
the original number of channels. (Note
that in the case of 6.1 ch audio, playback
will be at 5.1 ch)
Audio reformatting is enabled in the
following cases:
- When you have selected "PCM" in
"Digital Audio Output". (
- When the audio is Dolby Digital, Dolby
Digital Plus, Dolby TrueHD or LPCM.
Contents Type Flag
If "Automatic" is selected, the optimal
method of playback depending on the TV
(e.g. cinema) will automatically be
selected (only when the TV supports
Contents Type Flag).
Common Interface
Access to software contained on CI module.
(
9)
• Select "Slot 1:" or "Slot 2:" and press [OK].
Follow the on-screen instructions.
• On-screen instructions may not correspond to the remote
control buttons.
• For more information about TV service, please contact
your service provider.
• Depending on the card, in some cases its use together
with this unit may be limited or not possible.
98
TQBS0033
Network
Easy Network Setting
Press [OK] to start Easy Network Setting. (
Network Settings
LAN Connection Mode
Select the LAN connection method.
• When not using wireless LAN (when turning
95)
Wireless Settings
This allows to set and check the connection
settings of the Wireless router.
IP Address / DNS Settings
Check the connection of the network or set
the IP address and DNS.
• To set the IP address and DNS
• When the router's DHCP server function is
Proxy Server Settings
Check and set the connection to the Proxy
server.
• Press [OK] to show the respective setting.
it off), select "Wired".
Search for wireless network
WPS (PUSH button)
WPS (PIN code)
Manual setting
Select a connection method to wireless
access point.
1 Set "IP Address Auto-Assignment" and
"DNS-IP Auto-Assignment" to "Off".
2 Select the item, then press [OK] to show
the respective setting.
not activated, check the numbers of other
connected devices such as personal
computers, then assign a number different
from those of other devices for the "IP
Address" and assign the same number for
"Subnet Mask" and "Gateway Address".
22)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmr-ubs90

Table of Contents