Panasonic DMR-UBC90 Operating Instructions Manual page 32

To listen to the Audio Description
Audio Description adds an additional soundtrack
to describe events on screen (narration) and aids
understanding and enjoyment, particularly for
visually-impaired viewers.
When "AD" appears in channel information
( 31)
1 Press [OPTION].
2 Select "Audio Description" in "Digital TV
Menu", then press [OK].
3 Select "Audio Description" and set to
"Automatic".
4 Select "Volume", then adjust the volume with
[2, 1].
• Audio Description may not be available depending on the
type of audio format.
• When "Dolby D / Dolby D + / Dolby True HD", or "HE-AAC"
is set to "Bitstream", the Audio Description may not work.
Set them to "PCM" ( 95, Digital Audio Output).
• You can also set "Audio Description" active in the Setup
menu. ( 90)
If this unit requests a PIN
Enter the PIN with the number buttons by
following the on-screen instructions.
• If you decide on a PIN, make a note it in case
you forgot it.
• PIN (except CAM's) can be changed via "PIN
Entry". ( 102)
• For CAM's PIN, refer to your CAM's operating
instructions.
If encrypted channels do not appear
To watch an encrypted broadcast, insert the CI
module into the CI slot. (
• Set "Common Interface". (
32
TQBS0033
9)
98)
To use data service (Catch Up TV)
To use the data service function (Catch Up
Service), network connection and settings are
necessary. ( 19, 22)
• Set "HbbTV Setting" to "On". (
To select the data service, follow the on-screen
instructions. (e.g., "Press colour button." etc.)
• Operations may vary depending on the broadcaster.
• For information about other disclaimers.
( 115, About Network Service in "Disclaimer")
To select the contents in the broadcast
When a programme includes audio signals etc.,
you can select signals.
1 Press [OPTION].
2 Select "Digital TV Menu", then press [OK].
3 Select "Multi Audio" or "Sub Channel", then
press [OK].
4 Select the item.
90)