Panasonic DMR-UBC90 Operating Instructions Manual page 21

When connected to a
4K (50p or 60p)-compatible TV
When connected to a 4K (50p or 60p)-compatible
TV, you can set the video output format.
4K(50p/60p) Output
Start connection check with your 4K TV.
Once connection check is started and if the video is not displayed
correctly, please wait for the next display. The connection check
could take up to 30 seconds to display the new message screen.
Press OK.
OK
RETURN
Follow the on-screen instructions to set the
format.
• To reconnect this unit to a 4K (50p or 60p)-compatible TV
after connecting this unit to a 2K-compatible TV and
completing "Easy Setting", set "4K(50p/60p) Output" to
"4K(50p/60p) 4:4:4" or "4K(50p/60p) 4:2:0". (
To stop partway
Press [RETURN ].
To restart setup or change TV signal type
( 89, Auto Setup)
To confirm that channels have been tuned
correctly ( 33, Using Channel List)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
[UBS90]
Easy Setting
1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
3
Select language, then press [OK].
4
Select country, then press [OK].
5
Select the search mode, then press [OK].
6
Select "DiSEqC" (Dual Tuner), "Single Cable
System" or "DiSEqC" (Single Tuner) then
press [OK].
Auto Setup starts.
These operations (Searching Satellite and
96)
Searching Channels) may take some time.
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (
7
Set Quick Start to "On", "Off" or "Timer
Setting for Quick Start", then press [OK].
When "Easy Setting has been completed."
appears, Easy Setting is complete.
When connected to a
4K (50p or 60p)-compatible TV (
To stop partway
Press [RETURN
To restart setup (
To confirm that channels have been tuned
correctly (
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
102, Clock).
].
91, Auto Setup)
33, Using Channel List)
TQBS0033
left)
21