Panasonic DMR-UBC90 Operating Instructions Manual page 22

When selecting "Single Cable System" in
Step 6.
1 Select the "Single Cable Version".
Single Cable Version
Single Cable
Single Cable 2.0 (JESS)
Single Cable - EN50494:
Allow up to 8 user bands
Single Cable 2.0 (JESS) - EN50607:
Allow up to 32 user bands
Select
Confirm
RETURN
• Select the setting that matches the version of
your equipment.
• Check the Single Cable Version setting in
advance.
e.g.,
Unicable II
2 Make the settings of user band.
User Band Settings
Start Auto Setup
Please confirm user band settings before starting Auto Setup.
Tuner 1
User Band
User Band Frequency
User Band PIN
Tuner 2
User Band
User Band Frequency
User Band PIN
Tuner 3
User Band
User Band Frequency
User Band PIN
Select
OK
RETURN
• User Band
You can set C1 to C8. (If you have selected
"Single Cable 2.0 (JESS)", a value from C1
to C32 can be set.) Set to a User Band not
used by any other device.
• When only one User Band of the Router is
assigned, set "Tuner 2" and "Tuner 3" to
"OFF".
Note that you will not be able to record two
programmes simultaneously.
When two User Bands of the Router are
assigned, set "Tuner 3" to "OFF".
Note that you will not be able to record
three programmes simultaneously.
• User Band Frequency
Set the User Band Frequency with number
buttons.
22
TQBS0033
C1
1284 MHz
Off
C2
1400 MHz
Off
C3
1516 MHz
Off
• User Band PIN
If the single cable router requires a PIN to
access an user band, enter the PIN.
• For details, read the manual of the single
cable router, etc.
3 Select "Start Auto Setup", then press [OK].
• Set User Band as required.
• Refer to the operating instructions for your single cable
router for information about each item.
Easy Network Setting
After completing "Easy Setting", you can continue
with "Easy Network Setting".
Follow the on-screen instructions to establish
your connection settings.
Select "Wired" or "Wireless", then press [OK].
Easy Network Setting
Select a connection mode.
Wired
Wireless
OK
RETURN
LAN cable connection ("Wired")
Follow the on-screen instructions to apply your
connection settings.
Wireless LAN connection ("Wireless")
Before beginning wireless connection setup
• Obtain your network name (SSID
• If your wireless connection is encrypted, please
be sure that you know your encryption key.
• The default SSID , Password (Key) etc., may
§1
be printed on the router.
e.g.,
).
§1
SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
PIN XXXXXXXXX