Activating The Set Mode; How To Use The [ P1 ] - [ P4 ] Keys; One Touch Recall Of The Preferred Status; Set Mode Recall Feature - Yaesu FT-25E Operating Manual

Activating the Set Mode

Use the following procedure to activate the Set Mode and configure the
transceiver parameters.
1. Press and hold the F key to enter the Set Mode.
2. Repeatedly press the [▲] or [▼] key to select the Set Mode Item to be
adjusted.
3. Press the F key momentarily to enable adjustment of the Set Mode Item.
4. Press the [▲] or [▼] key to adjust the level, or choose the parameter, of the
selected Set Mode Item.
5. After completing the selection and adjustment, press the PTT switch to
save the new setting and exit to normal operation.

How to use the [ P1 ] - [ P4 ] keys

[P1], [P2], [P3] and [P4] keys may be used for
the followings:
•
One Touch Recall of a preferred setting
•
One Touch Recall of the Mode settings
Key

(1) One touch recall of the preferred status

1. To store a preferred setting, Press and hold one of the [P1], [P2], [P3] or
[P4] keys.
2. To recall a stored one touch preferred status, press the associated [P1],
[P2], [P3] or [P4] key.

(2) Set Mode Recall feature

1. Press and hold the F key to enter the Set Mode.
2. Press the [▲] or [▼] key to select the Set Mode Item you frequently use.
3. When the desired Set Mode item is displayed on the screen, press and
hold one of the [P1], [P2], [P3] or [P4] keys to store the Set Mode item.
4. To recall a stored one touch preferred Set Mode, press a [P1], [P2], [P3] or
[P4] key to recall the assigned Set Mode Item.
FT-25R/FT-25E Operating Manual
Store (Press and hold)
Store a preferred operat-
ing status or a Set Mode
Basic Operation
Recall (Press)
Recall the stored operat-
ing status or the Set Mode
23