Preset Functions Assigned To The [P1] To [P4] Keys; Setting The Preferred Operating Mode - Yaesu FT-25E Operating Manual

Basic Operation

Preset Functions assigned to the [P1] to [P4] keys

Press the F key, then press
the [P1], [P2], [P3] or [P4]
keys to recall the preset func-
tions as listed in the table at
the right. These F key func-
tions may not be changed.

Setting the Preferred Operating Mode

The following reset or preferred operating modes may be selected.
Display
F1:SET RESET
F2:MEM RESET
F3:BANK RESET
F4:ALL RESET
F5:MEM-ONLY
F6:VHF-ONLY
F7:FM-ONLY
F8:CLONE
1. Turn the transceiver OFF.
2. Press and hold the MONI/T.CALL key and the PTT switch simultaneously,
while turning the radio ON.
3. When the LCD backlight comes on, release the MONI/T.CALL key and
PTT switch.
4. Referring to the above table, press the [▲] or
[▼] key to select the desired operating mode.
5. Press the F key momentarily to activate the selected operating mode.
24
Key
F key +
F key +
F key +
F key +
Reset the Set Mode settings to factory defaults.
Clear the Memory settings to factory defaults.
Clear the Memory Bank assignments.
Clear the All memories and other settings to factory
defaults.
Operation on the Memory mode only.
Operation on the VHF Band only.
Operation on the FM Radio Broadcast Band only.
Clone mode.
FT-25R/FT-25E Operating Manual
Function
HOME channel
TX PWR setting
DUAL WATCH ON/OFF
Description
REV