Camera Setup; Setting The Camera Input; Setting The Camera Signal Input; Switching Video Patterns For Multi View Camera - Alpine INE-W987A Owner's Manual

Camera Setup

[Camera] is selected on the System Setup Menu screen in step 1. See
"System Setup" (page 41).
You can set up items related to the Camera.

Setting the Camera Input

Setting item:
Camera Select
Setting contents:
Off (Initial setting) / Front / Rear / Other / Camera Selector
Front: Front camera
Rear: Rear camera
Other: Side camera, Room camera, etc.
Camera Front Camera/Rear Camera/Side Camera connected to
Selector*: the optional Multi Camera Interface module.
* When selecting Camera Selector, you can set the Front Camera/Rear
Camera/Side Camera to On/Off. For details, see "Setting Multi Camera
to On/Off " (page 43).

Setting the Camera Signal Input

When the camera is connected, the video input signal type can be
chosen.
Further setting item:
Camera Signal
Setting contents:
NTSC (Initial setting) / PAL
Switching Video Patterns for Multi View
Camera
The video pattern can be changed when connected to Multi View
Camera.
When Camera Select is set to "Off " or "Other, " you cannot select this
item.
Setting item:
Guide Adjustment
1
Touch [Guide Adjustment].
The camera guide adjustment screen is displayed.
Multi View compatible Side Camera
2
Touch [Front] or [Rear].
The view will change to the selected view.
42
-EN
Multi View compatible Front Camera/Rear Camera
2
Touch [Back], [Panorama], [Corner], or [Top].
The view will change to the selected view.
• [Back] will not appear for the Front camera.
• For an explanation of video patterns, see the camera Owner's Manual.

Adjusting the Rear/Front/Side Camera Guide

You can adjust the camera guide position.
Setting item:
Guide Adjustment
1
Touch [Guide Adjustment].
The camera guide adjustment screen is displayed.
• If the video pattern is set to "Corner (Rear/Front Camera only), "
the camera guide will not be displayed.
• When you connect a Multi View compatible camera, select a
Video Pattern to make a guide adjustment.
• When you connect a Multi View compatible Side Camera, after
selecting the Video Pattern, touch [
[ ] (Right steering) to make the guide adjustment that
matches the position of the steering wheel in your vehicle.
2
Touch [Adjust].
• If [Adjust] does not appear, proceed to step 3.
3
Touch the guide you intend to adjust.
Guide line can also be selected by touching [
Rear Camera screen example
• You cannot adjust the position of the yellow guide line "
the centre independently.
It is controlled by a system to be the centre of the two yellow guide
lines " " and " " on the left and right, or the central green
line " " and red guide line "
Front Camera screen example
] (Left steering) or
] [ ].
" in
".