Table of Contents
Advertisement
Selecting the Output Speaker
[Phone Speaker] is selected on the BLUETOOTH setup menu in step
3. Refer to "BLUETOOTH Setup Operation" (page 52).
You can select which speaker in the car will output the audio from the
phone.
Setting item: Phone Speaker
Setting contents: All (Initial setting) / Front L / Front R / Front LR
All:
The sound is output from all speakers in car.
The sound is only output from the front left speaker.
Front L:
The sound is only output from the front right
Front R:
speaker.
Front LR:
The sound is output from the front left and front
right speakers.
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
• This option is not available when External AP is set to On.
Adjusting the Caller Volume
[Caller Volume] is selected on the BLUETOOTH setup menu in step 3.
Refer to "BLUETOOTH Setup Operation" (page 52).
You can adjust the volume of the incoming call.
Setting item: Caller Volume
Setting contents: 1 to 11 (Initial setting: 5)
Adjusting the Microphone Level
[Microphone Level] is selected on the BLUETOOTH setup menu in
step 3. Refer to "BLUETOOTH Setup Operation" (page 52).
You can adjust the transmit volume, during the call.
Setting item: Microphone Level
Setting contents: 1 to 11 (Initial setting: 5)
Adjusting the Ring Tone Volume
[Ring Tone Volume] is selected on the BLUETOOTH setup menu in
step 3. Refer to "BLUETOOTH Setup Operation" (page 52).
You can adjust the receive volume, during the call.
Setting item: Ring Tone Volume
Setting contents: 1 to 11 (Initial setting: 5)
Deleting All the Histories
[Delete Call History] is selected on the BLUETOOTH setup menu in
step 3. Refer to "BLUETOOTH Setup Operation" (page 52).
Dialled/Received/Missed Incoming histories are all deleted.
Setting item: Delete Call History
1
Touch [Delete Call History]
The confirmation screen is displayed.
• When there is no history, this option is not available.
2
Touch [OK].
All the histories are deleted.
54
-EN
Camera Setup
Camera Setup Operation
With an optional camera connected, its video is output to the monitor.
When the camera is connected, set this item.
The following steps 1 to 5 are common operations to each
"Setting item" of Camera Setup. Refer to each section for
details.
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
2
Touch [
(CAMERA)].
The Camera Setup screen appears.
3
Select the desired item.
Setting items: Direct Camera / AUX Camera / Camera Interrupt
(Power OFF Mode) / Reverse Mute
4
Touch [
] or [
] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
the window after setting.
5
Touch [
] to return to the previous screen.
• Immediately after changing the Camera Setup (while the system is
writing data automatically) do not turn the ignition key to OFF.
Otherwise, the settings may not be changed.
• For details on how to scroll through the list, refer to "Selecting an
Item in a List" (page 28).
Direct Camera Setting
[Direct Camera] is selected on the Camera setup menu in step 3.
Refer to "Camera Setup Operation" (page 54).
Setting the Camera Input
Setting item: Camera Select / Guide Adjustment*
Setting contents: Off (Initial setting) / Front / Rear*
Front:
Front camera
Rear camera
Rear:
1
*
If "Camera Select" is set to "Off", this option is not available.
2
*
If "Camera Select" in AUX Camera Setting is set to "Rear", "Rear"
cannot be set in Direct Camera Setting.
] to close
1
2
Advertisement
Table of Contents
