VeriFone MX800 Series Installation Manual page 4

Entering the Configuration Menu
In order to use the MX800 series via Serial the device must be configured correctly through the
configuration menu.
1. When you turn on the MX800 Series Pinpad you
may see either the FORMAGENT – USB (pictured
top left) or the pcAmerica Logo's (pictured bottom
left) this is where we can begin to access the
configuration menu.
Note: If neither of the screens (pictured left) are being
displayed then the device has no information loaded
on it. This is sometimes the case when a new device is
shipped.
4 | P a g e