VeriFone MX800 Series Installation Manual page 10

Step Type
1 OS RFS017
2 SP 017_01
3 SP 17.1.B
4 PCA 1.4
Version Download type on pin pad
Full
Partial
Partial
Full
15. Select the Hardware tab and then select Page 1.
16. Select Upgrade PinPad.
17. You should automatically be brought to the Alt.
Software Update tab, if not then select it.
18. Using the information from the Grid on below,
please start by installing Step 1 and then install
everything through to Step 5.
19. The following will need to be done for each
installation on the pinpad that will be performed:

Under Port Name on the Pinpad select COM3.

Under Baud Rate select the default (115200).

Select Perform to begin the upgrade.
Pin pad will automatically restart after
download
Pin pad will automatically restart after
download
Pin pad will automatically restart after
download
Must manually restart pin pad after
download
Remarks
10 | P a g e