Table of Contents
Advertisement
OPERATING INSTRUCTIONS
ARM / DISARM using OEM REMOTE (Requires databus module)
This option allows the OEM factory remote to Arm and Disarm the alarm system when you lock and unlock the
doors. This feature only works on newer CANBUS vehicle using a Data Module that supports this feature.
Default = Off.
nd
2
AUX. OUTPUT : (Remote AUX 2 Output, Option # 16)
This requires programming option #16. Consult your dealer for availability on your vehicle. To activate the
Second auxiliary output, Press and hold the Unlock and Trunk Button at same time.
DOME LIGHT ILLUMINATION (OPTIONAL)
This feature turns on the vehicles dome light upon disarm for 30 seconds or until the key is inserted and turned
on. This will provide illuminated entry to your vehicle at night or in dimly lit areas for added safety and security.
Note that dome light illumination will deactivate the active rearm feature if programmed for active rearm.
PRE-WARNING SHOCK PROTECTION & SENSOR ADJUSTMENT
If a low-level shock to the vehicle is detected, pre-warning protection will activate sounding 5 quick siren chirps
and 1 light flash. If a hard impact is detected the shock sensor will trigger the alarm system for 20 seconds. The
sensor can be adjusted as needed by turning the adjustment screws clockwise to increase or counter-clockwise
to decrease the sensitivity. The sensor is also equipped with 2 small indicator lights to ease the adjustment
process. Blue light = Pre-warning disturbance (5 siren chirps). Red light = A full alarm trip.
ALARM TRIGGERING
If there is an intrusion into the vehicle or hard impact to the body will sound the alarm and flash the lights for 60
seconds. After 60 seconds the system will automatically shut off and re-arm to continue to protect the vehicle.
If a door is left open, the unit will cycle a second time, bypass the door and still continue to protect the other un-
tampered zones.
OPEN ZONE ALERT/BYPASS
If the system detects a faulty or open zone (Door, trunk left open) when the system is ACTIVELY ARMED, the
siren will chirp 3 times along with 3 light flashes. The faulty zone will be automatically bypassed.
8
Advertisement
Table of Contents
