CrimeStopper SP-202 Operating Instructions Manual page 7

Remote control alarm system
Hide thumbs Also See for SP-202:
Table of Contents

Advertisement

EMERGENCY OVERRIDE / DISARM
If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to open
the door with the key, which will activate the alarm. Turn the ignition on and press the override/program button
for about 5 seconds (until siren stops). The Alarm will disarm. If you continue to hold the button for additional 7
seconds, the system will enter the Valet mode.
VALET MODE (Solid LED)
Disables alarm system for vehicle servicing. The alarm system must be disarmed to enter Valet Mode.
1. To Activate Valet Mode Manually: Turn the ignition on and press the Valet / override button [about 5-6
seconds] until the LED turns on solid. Repeat the process to exit VALET mode.
2. To Activate Valet Mode with the Remote: Press and hold both the Lock and Unlock Button together for
about 3 seconds until the Status LED turns on solid. Repeat the process to exit VALET mode.
DRIVER'S DOOR PRIORITY UNLOCK: (Optional)
This option separates unlock of the driver's door from the passenger doors with the remote control. The first
press of unlock button will unlock just the driver's door. Pressing the unlock button a 2
unlock the passenger doors.
TRUNK / HATCH POP (Optional)
This feature is designed to interface with existing Factory power trunk or power hatch release systems and may
require additional parts and/or labor charges. To eliminate the possibility of accidentally opening the trunk, there
are (3) options for button press selection. This option will allow you to change whether the Trunk release
activate by a:
1. Double press o Trunk button.
2. Single ½ second press. *Default = Single ½ second press*
3. Press and Hold 2 seconds. This output stays on until trunk button is released.
OPERATING INSTRUCTIONS
7
nd
time in 4 seconds will

Advertisement

Table of Contents
loading

Table of Contents