Leupold RX-2800 TBR/W Complete Operating Instructions page 9

READING THE INTERNAL DISPLAY
The Organic Light Emitting Diode (OLED) display reflected into the optical path
can be manually switched between ranging modes, as measured in meters or
(M)
yards , or used to obtain distance while simultaneously viewing the target . (The
(YD)
RX -2800 can also simply be used as a 7x monocular without activating the OLED .)
INTERNAL DEFAULT DISPLAY AS SEEN THROUGH THE RX-2800 TBR/W WHEN
THE RANGEFINDER IS TURNED ON
Upper display indicates TBR output setting, lower
display indicates your load group . If Last Target is on,
TBR
it will be shown at the top of the display .
YD
6