Leupold RX-2800 TBR/W Complete Operating Instructions page 29

To activate the appropriate ballistics group, TBR must be activated and you must
choose between BAS, MIL, or MOA . Once this has been done, pressing the MODE
button will allow you to select the appropriate ballistics group . GRP (Group) will be
shown in the upper display, and the current ballistics group will be
shown in the lower display . Press and release POWER repeatedly
to scroll through the available ballistics groups . Press MODE to
save the selection and move on to activate or deactivate Wind by
pressing and releasing POWER .
Pressing mode after your ballistic group has been selected will allow you to activate
or deactivate the wind hold feature .
When activated, the rangefinder will first display the distance to the target then show
the appropriate wind hold for the selected output . If the selected output is TRIG or
LOS wind cannot be activated .
Selected Output (TBR):
BAS
MIL
MOA
Wind Value Shown in:
MOA
MIL
MOA
26
TBR
8 1 :
TBR