Leupold RX-2800 TBR/W Complete Operating Instructions page 11

CONTINUOUS MEASUREMENT OF A MOVING TARGET / SCAN MODE:
Follow the instructions for "Measuring distance..." as explained previously .
1 . Once the target has been measured, continue to hold down the POWER button
and follow the object as it moves .
2 . The distance will automatically update as long as the POWER button is
continuously depressed .
3 . This procedure can also be used to obtain the range of multiple animals or
objects; simply move the reticle from one target to another while holding
down the POWER button .
CLEARING THE LAST DISTANCE OBTAINED:
The last range reading taken does not need to be cleared before reading another
object's distance . For that reason, there is no reset button . Simply aim at the new
object using the reticle, depress the POWER button and hold until the new range
reading is displayed .
The ranging accuracy of all Leupold RX -2800 Series rangefinders is ± 0 .5 yards/
meters at distances less than 125 yards/meters, while the accuracy at maximum
distance is ± 2 yards/meters . The maximum range of the unit depends on the
reflectivity of the target and atmospheric conditions . (see chart on page 9)
8