Leupold RX-2800 TBR/W Complete Operating Instructions page 10

To determine your battery's power level, look for the following indicators:
FULL – A full battery bar indicates your battery is at or near peak capacity .
2/3 – A half-full bar indicates your battery has reached half-capacity .
1/3 – The battery is nearing the end of its life and should be replaced .
NO POWER – If the battery bar is empty, and there is no data displayed above
the bar, your battery is dead and you must replace it . The battery status bar will
flash and the unit will shut down when no power remains .
Measurement of distance with the RX -2800 is a very simple operation:
1 . View the object of interest through the monocular .
2 . Depress the POWER button to power up the unit .
3 . Align the reticle over the object being viewed .
4 . Depress the POWER button again – this will cause the laser to activate .
5 . Read the distance as shown in the image field .
BATTERY POWER STATUS INDICATOR
MEASURING DISTANCE WITH THE RX-2800
7