Seat Adjustment; Steering Control Lever Adjustment - HUSTLER X-ONE 936740CE Operator's Manual

When mounting blades, rotate them after installation to
make sure blade tips do not touch each other or sides of the
mower.
Mower Blade Options
The following is a list of the approved mower blade options
that are available from Hustler
mower.
Use only genuine Hustler
ensure that original standards are maintained. Fail-
ure to use approved blades could lead to blade
breakage which could result in death, injury or prop-
erty damage.
52" Side Discharge Deck
787721 BLADE, F17.86"-H-F-CW
794198 BLADE, 17.86"-MUL-F-CW
785436 BLADE, 17.86"-GAT-F-CW
54" Rear Discharge Deck
601124 BLADE, F18.50"-L-F-CW
797704 BLADE, 18.50"-MUL-F-CW
797712 BLADE, 18.50"-GAT-F-CW

Seat Adjustment

This seat can be adjusted two different ways to obtain the
most comfortable position:
1. Use the seat release lever to slide the seat forward and
rearward. Figure 4-17
2. Adjust the seat firmness by turning the ride adjust-
ment knob. Figure 4-17

Steering Control Lever Adjustment

The steering control levers can be adjusted for operator
comfort.
A. To pivot the upper control levers forward or rearward,
loosen the cap screws that attach the upper control
lever to the lower lever. Then, pivot the upper control
lever. Tighten the cap screws. Figure 4-18
606839CE
Turf Equipment for this
®
replacement blades to
®
A. Seat release lever
Figure 4-17
B. To lower and raise the control levers, remove the cap
screws. Slide the upper control lever up or down and
align the holes in it with the holes in the lower lever.
Re-install the cap screws and tighten. Figure 4-18
The steering control levers should be adjusted so that they
align with each other when in the neutral position.
A
B
C
A. Upper control lever
B. Cap screws
Figure 4-18
4-9
B
A
B. Ride adjustment knob
C. Lower control lever
REV C
CZ
DA
DE
EN
ES
FR
IT
NL
PT
SV