Seat Adjustment - HUSTLER ATZ Operator's Manual

Do not sharpen to original pattern (below). It is
easier to get a straight cutting edge following
the resharpening pattern shown above.
Figure 4-12
Warped Blade (Replace)
Straight Blade
Comparison of Warped and Straight Blades
Figure 4-13
Cutting edge
Twisted Blade Edge
Cutting Plane Cutting edge
Straight Blade Edge
End view of blades, comparing
twisted and straightened blades
Figure 4-14

Seat Adjustment

The suspension seat can be adjusted four different ways to
obtain the most comfortable position:
1. Back angle (Figure 4-16)
604243
Resharpening
pattern
Original edge
Cutting
plane
(replace)
2. Forward and rearward travel (Figure 4-15)
3. Weight (Figure 4-15)
4. Lumbar (Figure 4-17)
5. Armrest (Figure 4-18)
Weight adjusting control
Lumbar control
4-9
Forward/rearward
travel lever
Figure 4-15
Back angle
control
Figure 4-16
Figure 4-17
REV C